Journal papers and
selected conference papers
Current to 2002
-
K L
Wlodarczyk, E Mendez, H J Baker, R McBride,
D R Hall, “Laser smoothing if binary
gratings and multi-level etched structures”
Applied Optics Vol. 49, 1997-2005 (2010).
-
Natalia Trela,
Howard J. Baker , Josef. J. Wendland, Denis
R. Hall, “Dual-axis beam correction for an
array of single-mode diode laser emitters
using a laser-written custom phase-plate”
Optics Express Vol. 17, Issue 26, pp.
23576-23581 (2009)
-
K M Nowak, H J
Baker, D R Hall, “A model for “cold” laser
ablation of green state ceramic materials”
Applied Physics: A Vol 91, No. 2 341-348
(2008)
-
F Sun, H J
Baker, A B Russell, J D Valera, D R Hall,
“Pump uniformity and temperature profile
measurements in a planar waveguide Nd:YAG
laser by a beam deflection method” IEEE
Journal of Quantum Electronics, QE-43,
669-675 (2007)
-
J Xu, I J
Thomson, J D R Valera, H J Baker, A B
Russell, D R Hall, “A Planar Waveguide
Nd:YAG Laser Using Active Q-Switching of a
Hybrid Unstable Resonator” Invited Paper,
IEEE Journal of Selected Topics in Quantum
Electronics, Vol. 13, 638-646 (2007)
-
C J Moorhouse,
F Villarreal, H J Baker, D R Hall, “Copper
foil drilling mechanisms using an enhanced
peak power planar waveguide CO2 laser” IEEE
Transactions on Electronics Packaging
Manufacturing 30, 254-262 (2007)
-
J.F. Monjardin,
K.M. Nowak, H.J. Baker, D.R. Hall, “Beam
error correction of laser diode bar stacks”
Optics Express Vol. 14, 8178 (2006)
-
K M Nowak, H J
Baker, D R Hall, X Liu. A J Bell, “Low-loss
single-mode fibre coupling in LTCC using CO2
laser fabricated U-grooves” Applied Optics
45, 9168-9175 (2006)
-
K M Nowak, H J
Baker, D R Hall, ““Cold” processing of green
state ceramics with CO2 lasers” Applied
Physics: A Vol. 84, 267-70 (2006)
-
E Mendez, K M
Nowak, H J Baker, F J Villarreal, D R Hall,
“Localised CO2 Laser Damage Repair of Fused
Silica Optics” Applied Optics, Vol. 45,
5358-5367 (2006)
-
Krzysztof M.
Nowak, Howard J. Baker, Denis R. Hall,
“Efficient laser polishing of silica micro
optic components” Applied Optics, Vol. 45,
162-171 (2006)
-
C J Moorhouse,
F Villarreal, J J Wendland, H J Baker, D R
Hall, “CO2 Laser Processing of Alumina
(Al2O3) Printed Circuit Board Substrates”
IEEE Transactions on Electronics Packaging
Manufacturing 28, 249 (2005)
-
D R Hall,
“Carbon Dioxide Lasers” Chapter B3, pp
751-791 in Handbook of Lasers and
Applications Eds C E Webb, J J Jones,
Institute of Physics Press (2004)
-
M G
Tsagkarakis, F J Villarreal, H J Baker, D R
Hall, S W Williams, “Surface melting of
Al–Cu–Mg alloy using a short-pulse, planar
waveguide CO2 laser for corrosion resistance
improvement” Journal of Laser Applications
15, 233 (2003)
-
K M Nowak, H J
Baker, D R Hall, “Pulsed-laser machining and
polishing of silica micro-optical components
using a laser and an acousto-optic
modulator”, Proc. SPIE, vol. 4941, pp.
107–112 ( 2002)
-
G A J
Markillie, H J Baker, F Villarreal, D R
Hall, “The effect of vaporization and melt
ejection on laser machining of silica glass
micro-optical components” Applied Optics
41, 5660-5667 (2002)
-
H J Baker, J R
Lee, and D R Hall, “Self-imaging and
high-beam-quality operation in multi-mode
planar waveguide optical amplifiers”, Opt.
Express 10, 297-302 (2002)
-
J R Lee, H J
Baker, G J Friel, G J Hilton, and D R Hall,
“High-average-power Nd:YAG planar waveguide
laser, face-pumped by 10 laser diode bars”
Optics Letters 27, 524-6 (2002)
-
J R Lee, H J
Baker, D R Hall, “Thermal guiding,
birefringence and brightness scaling of high
average power, planar waveguide lasers” OSA
Trends in Optics and Photonics (TOPS) XXIII
"Advanced Solid-State Lasers (2002)
2001 to 1995
1994 to 1990
Invited conference presentations
Current to 2000
1999 to 1990
|